¶ Introduction
This Configuration Guide is written as general guide on how to configure the Panasonic phone model KX-TGP550 to work with PBXware 4.1.3.
Panasonic KX-TGP550 supported features:
- Multiple VoIP accounts
- Auto provision via TFTP
- Call hold, mute, DND
- Call forward, call waiting, call transfer
- Redial, call return, auto answer
- Dial plan
- Codecs:G.722, G.711(A/u), Opus, G.729AB, G.723, G.726,iLBC
- Call history:dialed/received/missed/forwarded
- Anonymous call, anonymous call rejection
- Music on hold
- Voice mail
- Call park
- SRTP for voice
- Time and date synchronization using SNTP
- DTMF: In-band, Out-of-band (RFC2833) and SIP INFO
- IP assignment: static/DHCP/PPPoE
¶ Video Tutorial
Video tutorial explaining Auto Provisioning setup for Panasonic Phone on PBXware 4.
Video tutorial explaining Auto Provisioning setup for Panasonic Phone on PBXware 5.
¶ Requirements
¶ Identifying phone model
To start and successfully complete registration of your Panasonic phone you need to know which phone model you will setup.
From the back of each Panasonic phone there are exact model information that you should check. Although different phone models can have exactly the same requirements and installation procedure, phone models can also have significantly different requirements and installation procedure, so that ignorance of your own model may result in the inability to successfully set up your phone.
¶ Phone firmware
- Make sure that your phone is loaded with appropriate firmware version, 13.33.
- To find out the firmware version of your Panasonic phone model open a new browser window and enter your phone IP address in order to access the phone web administration interface login screen. Example: http://192.168.1.22.
NOTE: Phone web administration web interface is disabled by default. To enable access, go to Menu --> IP Service --> Network Settings and enable Embedded Web option.
- Login to phone web administration interface with your username and password. Please note, factory default login details are username: admin and password: adminpass.
¶ DHCP server
Fully configured and operational DHCP server.
¶ PBXware version
PBXware version 4.1.3.0
In order to find out the PBXware version:
- Login to PBXware
- Navigate to Settings: About.
On the top of About page is a code similar to this one PBXware Edition: Business, Release: 4.1.3.0 (387597b7), Running: 1.8.32.1-gc-b47edc45, PBXware Proxy v4.1.3 (62b7bcd), API: 4.1, libmemcached version: 1.0.14, where Release denotes the exact version of your PBXware.
¶ Installation
This chapter describes how to install and connect the phone to the electrical power and data network as well as how to apply factory settings.
The following topics are covered:
- Power adapter
- Power over Ethernet (PoE)
- Factory Settings
¶ Power adapter
Connect the Network and Power
- Connect the DC plug on the power adapter to the DC port on the phone and connect the other end of the power adapter into an electrical power outlet.
- Connect the ethernet cable between the Internet port on the phone and the network port on a router or switch to access LAN.
NOTE: If you are using Power over Ethernet (PoE), you don't need to connect the AC adapter. Make sure the Ethernet cable and router or switch is Power over Ethernet (PoE) compliant.
¶ Power over Ethernet (PoE)
Connect the Network (only)
Using a regular ethernet cable, your phone can be powered from a Power over Ethernet (PoE) compliant router or switch.
- Connect the Ethernet cable between the Internet port on the phone and an available port on the in-line power router or switch.
NOTE: If you are using Power over Ethernet (PoE), you don't need to connect the AC adapter. Make sure the Ethernet cable and router or switch is Power over Ethernet (PoE) compliant.
¶ Find the phone IP address
Find out your Panasonic phone IP Address.
- Press Menu button.
- Go to IP Services.
- Go to Network Settings.
- Go to IP Settings.
The IP address will be displayed on the display.
¶ Reset to factory settings
This step is not required for brand new out-of-the-box phones, however, if the phone has been already used then it is a must.
- Open a new browser window and enter your phone IP address in order to access the phone web administration interface login screen. Example: http://192.168.1.22.
- Login to phone web administration interface with your username and password. Please note, factory default login details are username: admin and password: adminpass.
- Click on Maintenance tab.
- Click on Reset to Defaults in the left navigation menu.
- Click on Reset Web Settings button in order to reset Your phone.
- Wait sometime prior for device to reboot.
NOTE: Do not unplug or remove power to the phone while it is updating firmware and configurations.
¶ Registering phone
This chapter describes how to identify Panasonic phone model, requirements that must be met and how to register the phone using manual configuration or auto provisioning.
The following topics are covered:
- Manual configuration
- Auto provisioning
¶ Manual configuration
This chapter describes how to set UAD settings, create PBXware extension and register the phone.
The following topics are covered:
- UAD settings
- Creating extension
- Registering phone
¶ UAD Settings
UAD settings
Login to PBXware web administration interface
- Open a new browser window and enter the IP address in order to access the PBXware web administration login screen. Example: http://192.168.1.10.
- Login to PBXware with your e-mail address and password.
UAD settings
- Navigate to Settings:UAD.
- Make sure Panasonic UAD is enabled. To check the UAD status click on the edit icon corresponding to your Panasonic phone.
- Make sure Status is set to Active, Auto provisioning is set to No, and DHCP is set to Yes.
- Click on the Save button to save changes.
¶ Creating extension
Creating Extension
Add Extension
- Navigate to Extensions. Click on Add Extension.
- The standard options window will be shown below.
- Select Panasonic phone model from the UAD select box.
- Select Location: Local or Remote.
Local is for all extensions registered on the LAN and Remote is for all extensions registered from remote networks, WAN, Internet etc.
- Click on the Next step button.
Extension values
Enter values into the required field text boxes.
REQUIRED FIELDS:
- Name
Enter a name for the extension being created. Example: John Smith.
Enter the e-mail address associated with this extension. This e-mail address will receive all system notification messages. Example: john.smith@bicomsystems.com
- Department
Department to which extension will belong to. Example: Sales.
- Click on the Save button.
¶ Registering Phone
This chapter describes how to register Panasonic phone using Hostname or IP Address.
¶ Hostname or IP Address
Login to phone web administration interface
- Open a new browser window and enter your phone IP address in order to access the phone web administration interface login screen. Example: http://192.168.1.22
- Login to phone web administration interface with your username and password. Please note, factory default login details are username: admin and password: adminpass.
- Click on VoIP in the navigation tab.
- Click on Line 1 in the left navigation tab, section SIP Settings.
- Enter or set the following details into the respective fields.
REQUIRED FIELDS:
- Phone Number
Usually the same number as the Authentication ID.
- Registrar Server Address
Enter the Hostname or IP Address of the PBXware.
- Example for Hostname: voip.bicomsystems.com
- Example for IP Address: 192.168.1.10
- Proxy Server Address
Same as the Registrar Server Address.
- Presence Server Address
Same as the Registrar Server Address.
- Authentication ID
PBXware extension number. Example: 1003
- Authentication Password
The Secret of the extension as received in the e-mail associated with this extension. Example: _%Z4M3*Ts9y7. A password is generated automatically for each newly created extension.
- Click on the Save button.
- If everything is done as above described, you should have successfully registered your phone to PBXware. Dial *123 to verify registration.
¶ Auto Provisioning
NOTE: Due to the issues in the phone's web GUI, before entering any Auto Provisioning data, Reset Web Settings must be done in the Maintenance menu. The phone will reboot during the proces.
This chapter describes how to set UAD settings, create PBXware extension and register the phone using DHCP or Static IP address.
The following topics are covered:
- UAD Settings
- Creating Extension
- Registering Phone
¶ UAD Settings
UAD settings
Login to PBXware web administration interface.
- Open a new browser window and enter the IP address in order to access the PBXware web administration login screen. Example: http://192.168.1.10.
- Login to PBXware with your e-mail address and password.
UAD settings.
- Navigate to Settings:UAD.
- Make sure Panasonic UAD is enabled. To check the UAD status click on the edit icon corresponding to your Panasonic phone.
- Make sure Status is set to Active, Auto provisioning is set to Yes, and DHCP is set to Yes.
- Click on the Save button to save changes.
¶ Creating Extension
Creating Extension
Add Extension
- Navigate to Extensions. Click on Add Extension.
- The standard options window will be shown below.
- Select Panasonic phone model from the UAD select box.
- Select Location: Local or Remote.
Local is for all extensions registered on the LAN and Remote is for all extensions registered from remote networks, WAN, Internet etc.
- Click on the Next step button.
Extension values
Enter values into the required field text boxes.
REQUIRED FIELDS:
- Name
Enter a name for the extension being created. Example: John Smith.
Enter the e-mail address associated with this extension. This e-mail address will receive all system notification messages. Example: john.smith@bicomsystems.com
- Auto Provisioning
Set to Yes.
- MAC Address
Enter Panasonic phone MAC address. Example: bcc342123456. MAC address can be found at the back of the phone.
- Click on the Save button.
¶ Registering Phone
This chapter describes how to register Panasonic phone using DHCP or TFTP.
The following topics are covered:
- DHCP
- TFTP
¶ DHCP
Configure DHCP
- Make sure your DHCP router is configured to use option 66 to automatically instruct phones with the URL for auto provisioning. For more information refer to your router documentation or contact your network administrator.
Phone first boot or user initiated reboot
- Auto provisioning process will start during phone first boot or after reboot process has been initiated by user. DHCP server will instruct the phone where from to pickup appropriate configuration file. If everything is done as above described, you should have successfully registered your phone to PBXware. Dial *123 to verify registration.
¶ TFTP
- Open a new browser window and enter your phone IP address, e.g. http://192.168.1.22.
- Enter username and password and press Confirm button. NOTE: Factory default login details are username: admin and password: adminpass.
- Click on Maintenance tab.
- Click on Provisioning Maintenance link in the left hand navigation menu.
- Enter tftp:// followed by Hostname or IP Address followed by /Config{mac}.cfg in the Standard File URL field.
Example for Hostname: tftp://voip.bicomsystems.com/Config{mac}.cfg
Example for IP Address: tftp://192.168.1.10/Config{mac}.cfg
- Enter the same in the Product File URL as in Standard File URL field.
- Click on Save button.
- You'll have to wait couple of seconds for the configuration to be updated. NOTE: Do not power off your phone.
- If everything is done as above described, you should have successfully registered your phone to PBXware. Dial *123 to verify registration.